Identically partition disks.. the easy way!

Was just looking into a software RAID howto.. for no reason really, but kinda glad I did! When you set up software raid you want to make sure all disks are partitioned the same, right. so check this out:

3. Create partitions on /dev/sda identical to the partitions on /dev/sdb:

sfdisk -d /dev/sdb | sfdisk /dev/sda

That’s a much easier way 😉

This gem is thanks to: http://www.howtoforge.com/how-to-create-a-raid1-setup-on-an-existing-centos-redhat-6.0-system